- Tap Off cabinets are used to divide and isolate sources by area (source each floor, each zone, …)
- Electrical cabinets meet domestic and international standards.
- The equipment and accessories used in the cabinet are selected in accordance with the needs of use, ensuring safety and efficiency during operation.
- The electrical cabinet cover is aesthetically designed, easy to install and operate, maintain and maintain.
- Scope of use: Apartments, factories, commercial centers,…
Tap Off Panel
PrintPower distribution cabinets are completed by Thông tin chi tiết về cổng game đổi thưởng mới nổi from design and production to fully meet domestic and international standards, ensuring safety in operation and easy operation and maintenance.
Để được hỗ trợ nhanh nhất. Vui lòng gọi 0903 803 645.
Mechanical Specifications:
- Form of cabinets: Form 1/2a/2b/3a/3b
- Degree of protection: IP 31/32/42/54
- Material: Steel plate/SUS
- Material thickness: 1.2mm ~ 2.0mm
- Paint color code: RAL7032/RAL7035/other
- Coating thickness: Min 50μ
- Installation type: vertical/wall mounted type
- Installation location: Indoor/Outdoor
- Cable exposure: top and bottom
- Dimensions of the cabinet: H x W x D depending on the schematic diagram of each project
Electrical Specifications:
- Main equipment: Mitsubishi/schneider/LS/other,…
- Applicable standards: IEC 61439-1/2
- Frequency: 50/60Hz
- Rated insulation voltage (Ui): 690V
- Rated operating voltage (Ue): 415VAC
- Rated pulse voltage (Uimp): 8kV
- Rated current (In): up to 1000A
- Peak pulse current (Ipk): up to 100kA
- Resistance to short circuit current over time (Icw): up to 100kA/3s
Related products
Main Distribution Switchboard
NPV electrical cabinets are designed according to IEC 61439 standards. Depending on the technical characteristics of each project, switchgear and protection equipment, busbar systems, cabinet modules, etc., are arranged in...
Distribution Board
Distribution board manufactured by Thông tin chi tiết về cổng game đổi thưởng mới nổi is designed to meet technical specifications and standards, besides it also meets different factors such as: compact size but still Ensure space for...
Automatic Power Factor Controller Panel
NPV switchboard is designed according to IEC 61439 standard. Using capacitors through MCCB/MCB/Contactor switchgear for the purpose of improving the system cosφ factor, reducing losses on the line.
Automatic Transfer Switches
NPV switchboard is designed according to IEC 61439 standard. Depending on the technical characteristics of each project, then use the integrated automatic ATS unit or use the ACB used as...
Synchronizing Control Panels
NPV electrical cabinets are designed according to IEC 61439 standard. Depending on the technical characteristics of each project, switchgear and protection equipment, busbar systems, cabinet modules, etc., are arranged in...
KWH Panel
NPV electrical cabinets are designed according to IEC 61439 standards. Depending on the technical characteristics of each project, switchgear and protection equipment, busbar systems, cabinet modules, etc., are arranged reasonably,...