- Automatic Transfer Switches is an electrical cabinet that is installed separately or in combination with a module in the MSB cabinet for the purpose of ensuring the continuity of the power source. ATS cabinets can be up to 6300A according to IEC61439 standard.
- The cabinet is installed with measuring and protection devices for the main purpose of switching and protecting the entire load system. In the event of a power failure, the system will respond to switching to the backup source to ensure continuity during power supply to the load. Generator start/stop time and switching time are allowed to be customized by the operator. The electrical cabinet has a mechanical and electrical interlock system to ensure that the power source is selected independently, without the situation of closing two sources at the same time. The system is controlled by 2 modes Auto and Manual.
- Depending on the technical design, the ATS cabinet can use the integrated ATS unit or use the ACB/MCCB/Contactor to make the ATS.
- ATS electrical cabinets are often used in constructions: Industry, Factory, Commercial Center, Building, Apartment, … where often sudden power failure can occur.
Automatic Transfer Switches
PrintNPV switchboard is designed according to IEC 61439 standard. Depending on the technical characteristics of each project, then use the integrated automatic ATS unit or use the ACB used as ATS to switch power automatically, ensuring the continuity of power supply. electricity for the load.
Để được hỗ trợ nhanh nhất. Vui lòng gọi 0903 803 645.
Mechanical Specifications:
- Form of cabinets: Form 1/2b/3b/4a/4b depending on MSB cabinets or standing individually
- Degree of protection: IP 31/42/54
- Material: Steel plate/SUS
- Material thickness: 2.0mm
- Paint color code: RAL7032/RAL7035
- Coating thickness: Min 50 microns
- Installation type: vertical type/wall mounted type for small rated current
- Installation location: Indoor/Outdoor
- Cable exposure: top and bottom
- Dimensions of the cabinet: H x W x D depending on the schematic diagram of each project
Electrical Specifications:
- Applicable standards: IEC 61439-1/2
- Frequency: 50/60Hz
- Number of poles: 3P and 1P
- Rated insulation voltage (Ui): 1000V
- Rated operating voltage (Ue): 400VAC
- Rated current (In): up to 6300A
- Operation mode: 2 mode operation Man/Auto
- Integrated: protection of current, voltage, phase, remote control via communication port if needed
- Display parameters: V, I, F, Cos phi, P, Q, S,…
Related products
Main Distribution Switchboard
NPV electrical cabinets are designed according to IEC 61439 standards. Depending on the technical characteristics of each project, switchgear and protection equipment, busbar systems, cabinet modules, etc., are arranged in...
Distribution Board
Distribution board manufactured by Thông tin chi tiết về cổng game đổi thưởng mới nổi is designed to meet technical specifications and standards, besides it also meets different factors such as: compact size but still Ensure space for...
Automatic Power Factor Controller Panel
NPV switchboard is designed according to IEC 61439 standard. Using capacitors through MCCB/MCB/Contactor switchgear for the purpose of improving the system cosφ factor, reducing losses on the line.
Automatic Transfer Switches
NPV switchboard is designed according to IEC 61439 standard. Depending on the technical characteristics of each project, then use the integrated automatic ATS unit or use the ACB used as...
Synchronizing Control Panels
NPV electrical cabinets are designed according to IEC 61439 standard. Depending on the technical characteristics of each project, switchgear and protection equipment, busbar systems, cabinet modules, etc., are arranged in...
KWH Panel
NPV electrical cabinets are designed according to IEC 61439 standards. Depending on the technical characteristics of each project, switchgear and protection equipment, busbar systems, cabinet modules, etc., are arranged reasonably,...