Flyer
More Documents- Automatic Power Factor Controller Panel is a type of electrical cabinet that is installed together with the MSB cabinet or installed separately in the electrical engineering room or right at the substation for the purpose of improving the cosφ factor. for the power system.
- The cabinet usually uses compensating capacitors controlled by automatic compensation controller through contactor switchgear. Depending on the technical design at each project that has a suitable APFC control cabinet, it is possible to use common oil or dry capacitors from 5KVAr to 50KVAr in combination with the corresponding reactor to reduce harmonics. The cabinet can be used in 2 modes Man / Auto through the capacitor controller.
- The electrical cabinet is designed in the form of a module, in which the switchgear, functional modules, and busbar system are arranged aesthetically and reasonably to facilitate the installation at the construction site and the upgrading as well. as the operation of the user unit. KVAr parameters depend on the design of each type of construction and still comply with IEC 61439 standards.
- Compensating capacitor cabinets are often used in constructions: Industry, factories, Commercial centers, Buildings, Apartments,…
Automatic Power Factor Controller Panel
Print
NPV switchboard is designed according to IEC 61439 standard. Using capacitors through MCCB/MCB/Contactor switchgear for the purpose of improving the system cosφ factor, reducing losses on the line.
Để được hỗ trợ nhanh nhất. Vui lòng gọi 0903 803 645.
Mechanical Specifications:
- Form of cabinets: Form 1/2/3b
- Degree of protection: IP 31/42/54
- Material: Steel plate/SUS
- Material thickness: 2.0mm
- Paint color code: RAL7032/RAL7035
- Coating thickness: Min 50 microns
- Installation type: wall-mounted/standing type
- Installation location: Indoor/Outdoor
- Cable exposure: top and bottom
- Dimensions of the cabinet: H x W x D depending on the schematic diagram of each project
Electrical Specifications:
- Applicable standards: IEC 61439-1/2
- Frequency: 50/60Hz
- Compensation levels: 6 to 14 levels
- Rated operating voltage (Ue): 220 – 230VAC/380 – 440VAC
- Compensation control: Man/Auto
- Compensation capacity: depending on the compensation characteristics of the works.
Related products
Main Distribution Switchboard
NPV electrical cabinets are designed according to IEC 61439 standards. Depending on the technical characteristics of each project, switchgear and protection equipment, busbar systems, cabinet modules, etc., are arranged in...
Distribution Board
Distribution board manufactured by Thông tin chi tiết về cổng game đổi thưởng mới nổi is designed to meet technical specifications and standards, besides it also meets different factors such as: compact size but still Ensure space for...
Automatic Power Factor Controller Panel
NPV switchboard is designed according to IEC 61439 standard. Using capacitors through MCCB/MCB/Contactor switchgear for the purpose of improving the system cosφ factor, reducing losses on the line.
Automatic Transfer Switches
NPV switchboard is designed according to IEC 61439 standard. Depending on the technical characteristics of each project, then use the integrated automatic ATS unit or use the ACB used as...
Synchronizing Control Panels
NPV electrical cabinets are designed according to IEC 61439 standard. Depending on the technical characteristics of each project, switchgear and protection equipment, busbar systems, cabinet modules, etc., are arranged in...
KWH Panel
NPV electrical cabinets are designed according to IEC 61439 standards. Depending on the technical characteristics of each project, switchgear and protection equipment, busbar systems, cabinet modules, etc., are arranged reasonably,...
x
x